Payment & Shipping Terms:
|Dimension:||450*277*45mm||Mode Of Adapter:||SC FC LC ST Single Or Multi-mode|
|Core Count:||12;24;36;48;72;96||Wiring Devices:||ODF|
Fiber Optic Distribution Unit,
Fiber Termination Panel
Wall Mount Fiber Optic Patch Panel Single Mode Pigtail Optical Distribution Frames
Description: rack-mounted fiber patch panel 24 SC simplex sliding type
Applicable in the branch connection of fiber termination, work as distribution box
19-inch standard structure, rack mounted
Available for the installation of FC, SC, ST, LC adapters
The body is made of cold rolled steel sheet, with electrostatic spraying
We can install adapters for you, available for FC, ST, SC, LC
LAN & WAN
3. Product Show:
4. Preparation before installation
A. Check the structure and type of fiber cables before installation; different fiber cables could not be spliced together;
B. Seal well the connective components to reduce additional loss to fibers caused by dampness; don't apply any pressure on the connective components;
C. Keep a dry and dustless working environment; don't apply any external force to the cables; don't bend or entwine cables;
D. Appropriate tools should be used for splice of cables according to the local standards during the whole
The installation procedure of the box
A. Open the front cover of the box or the top (if necessary), take down the fiber splice tray; let in the fibers
from the fiber entry and fix them on the box; the devices for fixation are as follows: the adjustable collet,stainless fiber cable ring & nylon tie;
B. The fixation of steel core (if necessary): thread the steel core through the fixed device (optional) and screw down the bolt;
C. Leave about 500mm-800mm long spare fibers from the peeled point of fiber cable to the entrance of the splice tray, cover it with plastic protective tube, fix it with plastic tie at the T type holes; splice fibers as
D. Store the spare fibers and pigtails, plug the adapters in the slots on the tray; or first plug in the adapters and then store the spare fibers, please pay attention to the direction of coiling fibers
E. Cover the splice tray, push in the splice tray or fix it with the slot at the edge of the box;
F. Install the box inside 19" standard mounting equipment.
G. Connect the patch cord as usual.
5. Fiber Optic Patch Panel Specification:
Intensity≤15KV(DC)/1minno spark-over and no flying arc
Fiber bending radium guaranteed more than 40mm:≥40mm
Application: It is applicable for straight-through connection and diverged
connection in aerial layout , duct and direct buried. It can protect fiber
|Insertion Loss (dB)||Fiber Type||/||Hi 780/ Flex 1060/
SMF-28e/ SMF-28e XB
|10/90||9.70---10.7||≤0.60||9.70-11.2||≤0.60||Excess Loss||dB||Typ.:<0.1 Max.:<0.2|
|20/80||6.70---7.60||≤1.15||6.60---7.80||≤1.15||Pigtail Dia.||mm||0.25 /0.9 / 2 / 3|
|40/60||3.95---4.30||≤2.50||3.70---4.70||≤2.70||Operating Tem.||ºC||-10~ +70|
|50/50||2.85---3.30||2.80---3.40||Storage Tem.||ºC||-40~ +85|
Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of ADTEK fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.
7. Carefiber care our life:
1.Any question will be replied within 24 hours.
2.Professinal manufacture,Welcom to vist our company.
3.100% test before shipping.
4.OEM/ODM is avaliable(As required print logo and customized color).
5.Fast delivery time(2 days for samples,order 3~7 days for bulk production)
Carefiber Optical Technology Co., Ltd. is one of the leading developers and professional manufacturers of fiber optical technology and high quality fiber optical communication products. We provide Fiber optic patch cord, Fiber optic connector, Fiber optic adaptor, Fiber optic PLC splitter,Fast connector, Fiber optic patch panel,Fiber terminal box,Fiber closure and more. For high-quality patch cord production line equipment, we can also offer insertion and return loss tester, interferometer test machine, connector tip microscope, connector crimping machine, connector polishing machine, connector heating oven, automatic cable cutting machine, etc.
We sincerely invite all interested buyers to visit our company and contact us directly for further information. Carefiber, Care you life.